Hoselink Fertiliser Spray Mixer

Connect the Fertiliser Spray Mixer to your hose and quickly and conveniently dispense commercial fertiliser onto your lawn or garden. The easy-to-use trigger spray is ideal for those who suffer from arthritis and are unable to use a pump-style bottle.

How to use the Fertiliser Spray Mixer

• Add concentrate to the bottle, no pre-mixing required. *Please ensure you read the instructions on the fertiliser bottle as this may vary.
• Set dilution ratio by turning the selector dial until the desired number is aligned with the brass knob on the side of the dial.
• Attach the Mixer to your Hoselink-fitted hose using the included Accessory Connector.
• Turn water flow on. Squeeze the trigger and spray on to your lawn or garden as required.

Installing the flow reduction

• Unscrew the bottle and remove the filter from the base of siphon tube.
• Unscrew the brass pin from above the selector dial.
• Push the flow reducer into the bottom of the siphon tube.
• Put siphon tube filter back in place and reassemble the bottle.

How it works

The selecter dial draws a measured amount of fertiliser up from the spray bottle and mixes it with water flowing through from the sprayer. Dilution rates are printed on the outside of the bottle for convenience. The benefit of this system is it allows for an even spread of fertiliser.

A note about the Fertiliser Spray Mixer

This product is suitable for use with Hoselink fertilisers and commercially available liquid fertilisers or soaps. If you are using a concentrate please follow the directions on the bottle (it may recommend diluting with water before use).

It is not suitable for use with granulated fertilisers, compost or worm farm liquid as the sediment in these liquids will clog the spray outlet.

Clean and reuse! Fill bottle with water, set dial to 10 and spray until empty. This will prevent the contamination of multiple fertilisers/cleaning products.

Specification